Site Links
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Badges
Please review the site Rules, Terms of Service, and Privacy Policy at your convenience. Rules, TOS, Privacy
Get familiar with the reaction system: Introducing the Reaction System
Wolf
About
- Username
- Wolf
- Joined
- Visits
- 9,410
- Last Active
- Roles
- Veteran
- Points
- 2,311
- Invited by
- Bryan@MAC
- 33
- Badges
Comments
-
It's not quite as visible on my pair, but definitely there.
-
I did glue a 3/4" thick plywood to the back for thickness, so it is closer to 1" thick now. I'm hoping the shallower grooves are less detrimental to the FR.
-
Happy Bday, Craig, and Happy Turkey Day to all of you!
-
The link says 19/32, so that is the thicker stuff with deeper grooves. The stuff I used here is only 3/8" thick.
-
That thought has definitely crossed my mind. I've wanted to do that ever since Ed LaFontaine built the 2 pair of "hay bails" out of OSB. Step 1- apply a coat of epoxy Step 2 - apply a second coat of epoxy Step 3 - sand and repeat ad infini…
-
Found some wood in the garage that I forgot or didnt know about. Not sure where it came from as I've never used this stuff. I was looking for scrap pieces to build baffle thickness for another pending Versabox baffle and found this stuff. Thought it…
-
I have noticed instances where Amir says it's a resonance or a difficult capacitive speaker load, and totally called it what it wasn't, or gave an incorrect reasoning for the assumed result. However, call him out and get banned. I've seen that happe…
-
RPB posted it over on PETT, or I would've missed them as well. I figured they would fit a niche somewhere. You are welcome!
-
Looking again, if I may have misunderstood your meaning, Nick, and you meant the 3.5k tweeter bump, I have revisited the simulation since what is seen above and tweaked some values. Since I have yet to take real FR whoops, this will likely change a …
-
(Quote) That was with the initial box sim in tow, and a larger box with lower tuning. It won't be there at all since the Versabox volume and tuning simmed above will get utilized. No listening has been done as yet.
-
I would agree, Don, especially for a midbass. Subwoofer specific woofers can do it and lower, but not many in that box and tuning. Baffle images with tweeters and midbasses just sitting in the rebates: (Image) (Image)
-
I thought the horn loaded CAT378 tweeter would push the AC rearward enough to get closer to the AC of the deep cone of the NE180-4. Real measurements to follow... Of note, I will be mocking up another project at roughly the same time. The Acacia bl…
-
This is what the model and information looked like when I did it: (Image) (Image) (Image) (Image)
-
Yeah- my daughter is 5' 3" at 12 years old. They definitely grow up fast...
-
All grown up...
-
For those wanting Siggy 180s... These popped up as buyouts. Funny how the Qms is higher more like my measured results. https://www.parts-express.com/6.5-Aluminum-Cone-Woofer-Truncated-Frame-80W-4-Ohm-299-2129?quantity=1
-
(Quote) Don't you mean Volkswagen? I'm almost positive VW owns Audi, Lamborghini, and Bugatti, as well as others.
-
Yep, looks legit.
-
Nicely done, Eric!
-
It does have a max spl with xmax. You have to click the tabs at the bottom for the right model. I might be able to zip the last software version folder and email it to you. Shoot me a PM.
-
Maybe later this evening I can hop on the laptop and take a shot. I'll see what I can do....
-
Treat it visually like downloading a program from the web, in this case microsoft.com, and get it from support or downloads section. It should be in the APPS section on your laptop if you already have it.
-
(Quote) What's the problem?
-
I didn't have problems using the USB-C or 3 type (blue) on my last year purchased Asus Tuf with Omnimic V1 running latest software, but the lower standard USB jack gave my T/S and impedance hardware a lot of noise. I ended up purchasing a card reade…
-
(Quote) I honestly have no idea what you are referring to.
-
BTW, found DJ on LinkedIn. He is still apparently working for John Deere in Iowa.
-
Zaph had a kid, and found more pleasurable foci than speakers in family and biking/fitness. Roman Bednarek found he had a mental illness and stopping actually eased the stress levels in his life. Paul Verdone, Mark Krawiec, Jay Kim, Wayne Wendel, an…
-
Micka.de is a very powerful program, but cantankerous as crud to set up. However, It happens to model what others don't.
-
I still use Unibox. I really like it. I use S&L WT2, OMNIMIC V1, PCD8 or Xsim, and am trying to familiarize myself with Vituixcad.
-
I like Mexican food, but don't much care for chorizo or guac.